Yes it is possible but to do like this you need to be sure that both of parts are same dimensions and in wood wop you should prepare programs. We have one bhx500 and two bhx560 and all of them works with two different program in a row. i will ad some example how it should look. There would be two different programs if you prepare just for one par to drill and there would be theese both programs mixed together.
Hier die Dateien im mpr Format.
Die Komponente ZP500_ENU.mpr war nicht Eingebettet. Kann sein das du sie noch mal laden muss.
Hallo David,
soweit ich sehen kann sind deine Programme etwas anders als die von Spaikijs4. Vielleicht liegt es ja daran, weil du die Komponente im Programm Oberhalb der Bearbeitungen liegen hast. Versuche mal die Kompo nach unten zu schieben! Ist aber nur eine Vermutung.
Alternativ vielleicht erstmal nur mit einer Bohrung Testen um das Problem schneller zufinden!
It seems that drillings on clamp side gives this error, check if you have apropriate tool in right place installed to do this drilling
It seems that drillings on clamp side gives this error, check if you have apropriate tool in right place installed to do this drilling
Thanks for the reply...each program runs by itself..its only when i try to mirror them I get the error....
Hallo David,
soweit ich sehen kann sind deine Programme etwas anders als die von Spaikijs4. Vielleicht liegt es ja daran, weil du die Komponente im Programm Oberhalb der Bearbeitungen liegen hast. Versuche mal die Kompo nach unten zu schieben! Ist aber nur eine Vermutung.
Alternativ vielleicht erstmal nur mit einer Bohrung Testen um das Problem schneller zufinden!
Thank you...I appreciate the time...
I'm not sure I understand that.... 
component above the edits?
The program runs great..I'm just trying to do 2 pieces at once...thats the only time i get this error..otherwise it runs well....
So if one part is working well than issue is that in each drilling head you have different tool placement, for bhx it is important to adjust all tools on both heads same sizes and same places to work fast and without any error messages. Milling cutters and saw you must change at the same time on both heads because you can get real trobles if you change only one and adjust different tool dimensions.
Display MoreThank you...I appreciate the time...
I'm not sure I understand that....
component above the edits?
The program runs great..I'm just trying to do 2 pieces at once...thats the only time i get this error..otherwise it runs well....
Ich habe es so eingestellt wie ich mir das gedacht habe.
Aber ob das funktioniert weiß ich nicht. Bitte Testen und schauen ob eine Fehlermeldung kommt.
This should work 
I set it up the way I thought it would.
But I don't know if that works. Please test and see if you get an error message.
Thanks..I've tried it a bunch of times...no luck
I get this error...
I have the tools in there....
It generates fine in woodwop...
I'm running other programs top and bottom at the same time..without issues (just not different drilling)
Those 2 gables are identical with the exception of the three little holes.
By everything I've read this should work....
This should work
I was hopeful..lol.... 
Tomorrow i can check this program on my bhx and will say what happens
Tomorrow i can check this program on my bhx and will say what happens
Thats great..thanks so much!!!!
Don’t have an account yet? Register yourself now and be a part of our community!
