The attached MPR has 2 NC stops.
They both have condition statements, some of which are global variables. Screenshot below.
I want the 2nd NC stop to off when the 1st NC stop is true/active/on.
Suggestions?
Condition statements
-
-
the condition for the second stop could be first stop <>1. when the first stop is 1 (true/on) the condition statement will be false therefore 0.
-
Not sure I understand. Could you explain more or show me in an MPR?
-
the first ncstop is defined by variable stop1 and the second (no variable in table) has the condition of stop1<>1 so changing stop1 to YES causes ncstop2 to be disabled.
-
Ok, now I understand. but that requires user/operator interaction to turn that 1st stop on/off.
The condition in my 1st stop says (t>11.5 AND t< 12.45 AND l>2032) OR ncss=1
My 1st stop turns on/off automatically by looking at t and l. And if on operator needs to override t and l, they would go to global variables and set ncss=1
I would like my 2nd stop to be OFF when my 1st stop is ON......which would mean whenever (t>11.5 AND t< 12.45 AND l>2032) is true or ncss=1 then the 2nd stop would be OFF
Thanks for your help!
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
