hi guys,
I'm very new to Woodwop 7 and i would need some help with DXF layer, i have wooden door to do with holes, grooving, pocketing and round over.
any help would be great!
hi guys,
I'm very new to Woodwop 7 and i would need some help with DXF layer, i have wooden door to do with holes, grooving, pocketing and round over.
any help would be great!
Hi,
please check this
https://www.stilesmachinery.com/articles/assig…to-dxf-geometry
or you can upload your dxf and i will set it for you as example
Marek Skotak
msskotak@gmail.com
http://www.cadcam-softcz.cz
[USER="559"]Maroslav[/USER] Hi, that would be awesome, i have a dropbox link attached with the 3D design, and i have the 2D design attached here.
https://www.dropbox.com/s/mj5hxqhbduy0…lle_3D.dxf?dl=0
Thanks
Chris
[USER="559"]Maroslav[/USER] did you get a chance to look at my 3D and 2D drawing.
Hi Chris,
I don't have much experience with ww7,
but I think it is similar to older versions.
I attached a help file with a lot of layers from our machine, I deleted all the drawing and saved it as a template
also a sample for your Wood grille
any more questions let me know
Regards Fred
Hi,
please check this educational website
https://www.stilesmachinery.com/arti...o-dxf-geometry
or you can upload your dxf and i will set it for you as example
Marek Skotak
"msskotak@gmail.com"[/email]
http://www.cadcam-softcz.cz
I agree with you.
Yes, there are of course miscalculations. There is generally no clear division - even during the hottest shooting, the characters continue to share story information and are in the image.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!