Posts by KoenW

    When we make a nesting program and send it to the saw or our nesting machine, we can't adjust the program later.

    A notification will pop-up with stock is already used.

    We didn't had this problem in the past.

    The only thing that we have changed, as far as we know, is that we use directly the storage and not the cute rite database.

    But we didn't had this problem when we started with this.

    The only thing we can do for know is deleted the complete set of date of this list.

    Who has a solution or a answer for this?

    Anbei eines Programm und die Markro.

    Die Breite ist 10 im Programm und 10,2 im Makro.

    Es findet keine Aktualisierung des Wertes statt.

    Dies passiert auch nicht, wenn ich das Makro öffne, es speichere und schließe.

    Wir verwenden die Makros, um immer die richtigen Einstellungen zu erhalten.

    In einigen Programmen sind die Werte selbst pro Makro unterschiedlich, ohne dass es geöffnet und geändert wird.

    Müssen wir irgendwo eine Einstellung ändern, um das richtig zu machen?

    Bei der Verwendung von Makros sehe ich, dass sie manchmal nicht aktualisiert werden.

    Zum Beispiel, ich habe 9 gleiche Makros und 8 werden aktualisiert und 1 nicht. Es ist ein fester Wert, der in den Makros steht.

    Wann wird ein Makro aktualisiert und wann nicht?

    Muss Ich immer das Programm in WoodWop öffnen oder wird dies auch gemacht beim Laden des Programms in die Maschine.

    Im Gebrauch verliere ich regelmäßig ein Fenster, wil ich wieter arbeite.

    Durch die Einrichtung des Programms seht man die zusätzlichen Popup-Fenster nicht im Windows Explorer.

    Das Termineren des Programms ist jezt meine einzige Option.

    Gibt es andere weniger fatale Optionen?

    Steht die Begrenzung/Limit auf die richte werte. Wenn is rot markiert sind keine platte da.

    Limit steht bei uns auf 9 - Es gibt dan 10 Platte eben wenn noch 3 Platte ims lager sind.

    Schau mal in die Hilfe wo diese Werte erklärt werden, denke das dann das probleem sich löst.

    The problem is that it's not always a left door with a left component sometimes it's a right door.

    People make mistakes (a lot), we want it fool proof.

    And at the machine the operator only scan's and has no further info.

    Program's are created automatic.

    The problem is that the mpr program automatically comes out of our CAD/CAM software.

    It already exports a component with uses variables to place the different tools.

    This works fine with left doors but it doesn't work right with right doors.

    This because I can't use the x,y cordinates of the placement.

    No we solve this by using a right and left door template, but people often use the wrong template wich cause more work.

    That wasn't the question, that's part of the problem.

    The problem is more that I want to use the position of the x,y cordinates of the component placement.

    So a component is place at x=50 and Y=25. How can I call these cordinates in the component.

    Can you recall in a component the x-postion of the component?

    The component is placed on x=150 (variable) and I want to use this postion in the component for futher placement of tools.