Posts by NachoHuizar

Quote from renault1

Hey,

now it worked!!

go to log out
then select user hgservice
and Homag as a password
with normal user change it does not work

well finally!!!!

Nevertheless, I think it's a shame that Homag didn't get any information on this!!!!:mad:

Display More

I have problems with the offset of the machine and normal users like "user" "administrator" do not work, I found this, tomorrow I will try with those users.

Just for future reference I leave the normal users of homag.

works in homag 2004 machine windows 95 nt

User: user Password: cnc

User: administrator Password: Homag

i will try this on 2004 machine ...

User: hgservice Password: Homag

Quote from bruderp

Bpp Version 5.0.2.0 von 2003

BpplF60 dxf Postoprozessor Interface 1.0.4.0 von 2003

We use woodwop 5 to, and we use fusion 360 wirth a custom postprogram to make it work

Quote from Basil

Hall Hannes

If the error occurs when starting machining, it may be that the collision length of the tool is entered incorrectly in the tool manager.

The machine therefore corrects too far when approaching the contour and thus overshoots the software limit switch.

Greetings Basil

Display More

I have a similar problem but, when I try to change the offsets, it won't let me, it has some red locks, I use woodwop5 on a windows 95 pc

Hello everyone, does anyone know why my 0 point is moved? I am using Fusion 360, and I set my 0 point properly.

Within the fusion program I did not program any offset, and the problem persists when we make cuts in woodwop 5, neither did I modify any offset in woodwop 5, also we dont modify any offset in the program that generates the job, PC85_BELEG.

When we reference the machine every time we turn it on, it takes that 0 point for granted with the offset.

Does anyone know how to reference point 0 in woodwop 5 Optimat Bof 311/40/R

[Blocked Image: https://scontent.ftij1-3.fna.fbcdn.net/v/t39.30808-6/327742151_709293824127851_3834246668478043500_n.jpg?_nc_cat=108&ccb=1-7&_nc_sid=dbeb18&_nc_ohc=ow59c9FfGMoAX-XLhnr&_nc_ht=scontent.ftij1-3.fna&oh=00_AfD0xipm8hKG0V4ay3SW3cbNBl8cyL5xERryDTFP1qwGRw&oe=63D627F9]

Quote from BESCH

Hello Moin,

I am the new one here and hope for help and of course I would like to help!!!

we have a 21 year old OPTIMAT BOF 41/30 / K

My problem:

The machine apparently has a "life of its own" which we cannot fathom.

The day before yesterday the support drove into the tool changer, but this was probably not correct and completely canceled!!!

So, the machine is running again, but the zero points of the spindle and the drill head have probably shifted.

??? where can I set that???

Thank you for your input!!!

Greetings Christian

Display More

Something similar happens to me, I have an Optimat BOF 311/40 / R, we are using Fusion 360 with it, but we cannot program point 0, and when the speed increases it stops.

You can use the new postprocessors, you just have to add 2 // to a few lines so you don't get the type of invalid error, I've attached a video where I found the solution and it would be helpful if you subscribe to the channel, it helps a lot.

I did not know that, tomorrow I will do some tests to see how it turns out.

thank you

Hello everyone,

I wanted to see if there is a more practical way to do this, I commented that I don't have the pro version of woodwop 7 cadcam, but I do have the pro version of the dxf importer, the idea is to make bowls, grooves, I don't know as it is said in English, but I leave a reference image, is it possible to import a spiral that starts at 0 and ends at 3/8 to the center? or the only way to do it is with several passes to different radios as I show in the photo.

and at the end, the sandpaper is passed manually.

Post for woodWOP

Video

Assigning WoodWOP Layer Names to DXF Geometry | Stiles Machinery

I enclose a base file, which is located in one of the folders inside the cnc machine or where woodwop is installed, usually the drawing is made and then you assign a layer to each polygon with a specific name according to the tool you want to use.

attached site where you can read more about it

I found a way, it can be changed if you open the .mpr with notebook and change "AZ="0"" for the value you want and replace the value in all macros with "replace all" but how can I change AZ from the beginning?

I have problems with the "approach clearance" option in woodwop 7, I already know how to export from autocad to woodwop7 but the operator has to change in each macro the "approach clearance" option by default is 0.

Any way to configure or where I can change the default values of the macros?

in Vertical Trimming?

Unfortunately I get a fatal error window, and it won't let me open the program, it only gives me the address of this file.

Thanks, let me run it on the machine to see how it goes

We have woodwop 7 with a 114M velture, usually we work in cad and go to bpp5 and from there to woodwop7, but we do not know how we can make the cnc make the angles in this way, I emphasize that the woodwop7 cam plugin does. We have in testing, it can only be opened about 30 more times, if there is a way to program the machine so that it can do this, without the cam plugin, (I already sent the company to see if we can buy it)

Quote from samiki

Hello!

Here are a few pictures of how you can import components with dxf imports. Depending on the component and the variables in it, a circle or line, for example, will suffice in a dxf file. But if you want to control, for example, the size of the rectangle and the angle of rotation, etc., you have to do it as a block.

You can also find this example on youtube.

-Sami

Display More

I have seen that you help many, have you thought about doing basic tutorials? I would like to learn and I think it would be very helpful to the other members.

could you solve it?

friend, if you ever see this, could you do me a favor, I have the same model and the hard drive was damaged by a short circuit, do you think you can give me a copy of the software?

my email is it-support@dependablefm.com

friend, if you ever see this, could you do me a favor, I have the same model and the hard drive was damaged by a short circuit, do you think you can give me a copy of the software?

my email is it-support@dependablefm.com

Look for the manual inside the files of the machine, that helped me a lot to understand