Gschloar Vielen Dank für Dein Feedback und diese Initiative.
Posts by woodWOP_Scout
-
-
Hallo zusammen,
ich kann heute noch nicht zu viel verraten aber das Entwicklungsteam von HOMAG ist an diesem Thema dran
und wird genau die von euch genannten Problemen lösen.
-
Hallo Gschloar,
woodTime ermöglicht es eine sehr genaue Zeitberechnung von einem woodWOP-Programm zu machen.
Man kann unterschiedliche Ansichten der Zeitachsen wählen (z.B. Werkzeugbezogen). Das Programm wird im Hintergrund auch simuliert und geprüft.
Die Simulation ist aber nicht wie in woodMotion visuell.
-
Hi Stephen,
the component is only used on WEEKE CNC machines. I am pretty sure that it doesn't work on your BMG311.
If you run woodWOP 8 on your BMG311, you should be able to find the dynamic level in the NC options of the woodWOP program. Maybe check with your local HOMAG support team why it is greyed out.
-
Hi Stephen,
thank you for your question. You are using woodWOP 8.0, correct?
From woodWOP 8.0.621.0 onwards it should be the standard behaviour to not use cntrl+ click.
Which version of woodWOP do you have exactly?
-
Hi tratfab, you just have to deactivate the macros for the consoles and change the variable MDF19 to 0.
If you are not sure, contact your local support team. It should be an easy one for them to change the program according to your CNC.
-
Hi cbl123,
my colleague in the demo center told me that he used a CNC with a 126/152 m³/h .
He did use the tabs so the parts are still all connected.
Regards
Simon
-
Hi cbl123,
you use a raw part of MDF as spoil board between the suction cups and the plywood (see pictures).
If the vacuum of your CNC is strong enough it should hold (it did in our demo center). If your vacuum is not strong enough, you can put the plywood directly on the cups but make sure that you don't mill all the way through in the second pass (leave for example 1mm). Otherwise you will damage your suction cups.
You will have to manually remove the remaining 1mm to seperate the parts.
Kind regards
woodWOP Scout
-
Dear HOMAG Software Forum members,
this year we prepared another nice gadget for you:
a decorative bottle stand for your favorite drink during the festive season.
🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁
🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁You will find all necessary information in the first comment macro in the woodWOP files.
For very thirsty members we have prepared a woodWOP file containing 5 bottle stands.
We wish you a lot of fun preparing your own bottle stand!
NOTE:
To download the programs, you need to register in the Software Forum.
After registration you will receive another e-mail with a confirmation link.
This e-mail sometimes ends up in the SPAM folder, depending on your e-mail settings.
-
Hallo liebe Mitglieder des HOMAG Software Forum,
auch dieses Jahr haben wir für euch etwas Großartiges zum Nachbauen vorbereitet:
ein dekorativer Flaschenhalter für euer Lieblingsgetränk während der Weihnachtszeit.
🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁
🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁🎅 🎄 🎁
Im ersten Kommentarmakro der woodWOP-Programmen findet ihr alle Hinweise und Infos, die ihr braucht, um loslegen zu können. Für Mitglieder mit großem Durst haben wir ein Musterprogramm für 5 Flaschenhalter vorbereitet.
Wir wünschen euch viel Spaß beim Nachbauen und eine schöne Vorweihnachtszeit!
HINWEIS:
Um die Programme herunterladen zu können, müsst ihr euch im Software-Forum registrieren.
Nach der Registrierung bekommt ihr nochmals eine E-Mail mit einem Bestätigungs-Link.
Diese E-Mail landet je nach euren E-Mail-Einstellungen manchmal im SPAM Ordner.
-
Hi everybody,
please find attached some woodWOP christmas presents from our archive.
Kind regards
woodWOP Scout
-
Hallo zusammen,
anbei einige Weihnachtsgeschenke aus dem woodWOP Archiv.
Viele Grüße
woodWOP Scout
-
Guten Morgen Tefse, vielen Dank für Deine Anfrage.
Am besten mal mit den Kollegen aus dem Softwaresupport von HOMAG sprechen.
Viele Grüße
woodWOP Scout
-
Hi Stephan,
this error message doesn't ring a bell with me. I suggest you get in toucg with your local hotline. If they can't help they will get the hotline from HOMAG in Germany involved.
-
Hallo Niehaus, Du kannst diesen Pfad über Einstellungen - Kontext bearbeiten.
-
Hallo Wie?rum,
wenn Du nicht weiter kommst, HOMAG bietet auch Webinare zu einem bestimmten Thema an. Vielleicht hilft es ja, einen Trainer für ein paar Stunden zu buchen und Dir die Basics erklären zu lassen?
VG
woodWOP Scout
-
Hi Hriboo,
we no longer supply the demo version of woodWOP 6.
The demo version of woodWOP 8 is available on CNC-Software downloads | HOMAG
Kind regards
woodWOP Scout
-
Hallo rmp,
für Dich zur Info: der Export als *.step oder *.iges in woodWOP funktioniert nur mit Flächen und Elementen erstellt mit dem CAD-Plugin.
Die Bearbeitungsmakros für das Bohren, Sägen, Fräsen, usw. werden nicht exportiert (wie Du schon rausgefunden hast).
-
Hi Tefse,
I suggest you get in touch with our team at software support.
Kind regards,
woodWOP Scout
-
Hi Merlinmalc,
ino trimmer found could mean that AlphaCAM is generating the woodWOP file with a certain tool number but that the tool isn't available or doesn't exist. What is the tool number that AlphaCAM generates into the woodWOp file? Can you find this tool number in the ToolManager as well?
Maybe the tool number is OK, but the tool type in the toolManager isn't correct.