Announcement

Collapse
No announcement yet.

Weeke drilling problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Weeke drilling problem

    Hello,

    Can anyone give some advice on how to use the Aspire to control the drill block on weeke machine.The problem is when a drill is selected in Aspire and toolpathed,and loaded onto cnc ,the drill cannot be selected from the drill block on the cnc database,we have worked around this by putting a drill into a router tool ,although this works i would prefer to use the drill block.

    Please help

    I didn't find the right solution from the internet.

    References:
    http://forum.vectric.com/viewtopic.php?f=27&t=11262
    Teaser video production service

    Thank you



  • #2
    Hello.

    I once adjusted the postprocessor file. Now holes are being handed over. The diameter and drilling depth are variable and must be adjusted in the WoodWop.
    The file must be saved in the following folder: C:\ProgramData\Vectric\Aspire\V4.5\PostP\
    Then restart Aspire and select new postprocessor.

    Please Try.

    Koala
    Attached Files

    Comment

    Working...
    X