Announcement

Collapse
No announcement yet.

Software frustration

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thellesen
    started a topic Software frustration

    Software frustration

    There might be a error here. We are doing a lot of holes.. After a certain number of holes this fail occurs when running the program.

    Can i do something to cheat out more holes faster - Sometimes it is around 20.000 holes for just 1 program.
    Attached Files
    41 rows 42 rows - same program

  • Thellesen
    replied
    DanC - files-> import -> CAD -- The DXF has to be in a older format than 2018. I do not know why...

    Last update on this toppic:

    We did not have any luck with the software "IntelliDrill". The program was way to hard using with fixture, and moving around. In the end the company invested in a Vitap acoustic machine. 55 holes drilled in 4 seconds.. As always: "Right tool for the job"

    Leave a comment:


  • DanC
    replied
    From Inventor I have saved a part as a .DWF file (it shows it as .dxf in the saved location) and it opens as a .dxf file on TrueView (I am not familiar with trueView, but it seams to be the default program for the .dwf file) Can anyone tell me if or what I need to do to convert it to a .mpr file or another file I can open using woodwop.

    Thanks

    Dan C

    Leave a comment:


  • Thellesen
    replied
    Update 2: After still not getting the result i would like, i made contact to support, and was redirectet to a german guy that would like to test a program called "IntelliDrill". Going from generating NC codes in 3 houres, to LESS than 1 second! - Of Course it's a test program, so i will update again later.

    But it looks promising .

    Leave a comment:


  • Thellesen
    replied
    Update: As it is right now i have made a new program with 4 blocks that can be used up to around 10.000 holes. Optimized drillings takes 3 houres just to generate, and it is still not optimized right..
    More on that in another topic. - I have contact with a danish HOMAG program specialist.

    Leave a comment:


  • Thellesen
    replied
    Optimation makes it use single drill ether way. The program i am using for this is normally a variable program with a blok macro. the one attatched is just a simple example of the error.

    Leave a comment:


  • pfoti
    replied
    Hi,

    optimation?

    You do 127 holes in X, but with 6 drillers(?) its not possible to do.
    Like 6x21=126 +1=127...

    Wait until the first row is ready and look what´s going on..

    Regards
    Pfoti

    Leave a comment:

Working...
X