Announcement

Collapse
No announcement yet.

Trimming with A-angle

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trimming with A-angle

    Hello,
    In my company we have several different 5-axis machines, we try to optimize our programs, so each machine could take an .mpr file and work with it.
    The question is:
    if z dimension is "0" in one machine it will trim by left side, in another machine it will trim by center. BUT if i change parameter to "@0" then both machines will trim from the left side... Any solutions?

    In both ways woodwop tool display show trimming from the left side..
    Attached Files

  • #2
    Hello,

    in our company we have the "same" problem. (the same program for 4 and 5 axe ). You can solve this by making global variables (extra->varables->global) you can youse thes variables to use 1 part of a program. Global par. are valuse specific on a machine
    examble
    Globale par on machine 1 en 3 MACHINE_=1 on machine 2 MACHINE_=2
    in the program : IF MACHINE_=1 then cut like this if MACHINE_=2 Cute like that

    Comment

    Working...
    X